Lean Manufacturing Training in Zimbabwe

Build Leaner Production Lines

Designed for production managers, engineers, supervisors and continuous improvement teams across Zimbabwe, this instructor-led programme builds hands-on command of the Toyota Production System toolkit, from the five Lean principles and the eight wastes to 5S, value stream mapping, kanban and OEE, so you can eliminate waste and lift productivity on your own lines.

Live Virtual

Mode

Hours

1K+ already enrolled

4.8 (350+ Reviews)

18 enrolled this week

Want to Train Your Team?

Master Lean Manufacturing and Lead Efficiency in Zimbabwe

Starts from

USD 345

What Is Lean Manufacturing and Why It Matters in ZimbabweA Practical Route to Waste-Free Production

Lean Manufacturing Training in Zimbabwe is a practical, one-day skills programme that teaches teams how to identify and eliminate waste from production so that every step adds value for the customer. Rooted in the Toyota Production System (TPS) developed by Taiichi Ohno and Shigeo Shingo, Lean gives you a proven toolkit for improving flow, cutting lead time and lowering cost.

The course suits production and manufacturing managers, industrial and quality engineers, operations supervisors, team leaders and continuous improvement coordinators working across Zimbabwe's food and beverage, cement, packaging, FMCG and agro-processing plants. No prior Lean experience is needed, because the training builds every tool from first principles.

With national capacity utilisation still near 56% and roughly half of industrial capacity idle, Zimbabwean manufacturers are under real pressure to do more with less. You leave able to run a waste walk, map a value stream, launch 5S, design a kanban pull system and calculate OEE, and put those skills to work from day one. Start your Lean journey with Invensis Learning.

Key Highlightof the Lean Manufacturing Training Course

End-to-End Skill Development

Structured Lean Manufacturing training in Zimbabwe designed to help learners understand the core principles, tools, and workflows covered in the program
Course content aligned with current industry expectations, real-world production improvement requirements, and practical learning objectives through a comprehensive Lean Manufacturing training program
Real-world examples and scenario-based learning to help learners connect Lean principles with everyday production, quality, and operations challenges
Guided learning support to help participants strengthen understanding, improve confidence, and apply Lean Manufacturing skills effectively in their roles

Structured Courseware and Learning Resources

Access to organised Lean Manufacturing course materials including Value Stream Mapping templates, 5S audit checklists, and Kaizen event planning guides designed to support step-by-step learning
Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of waste elimination, flow design, and continuous improvement practices
Practice activities, assignments, and scenario-based exercises to help learners apply Lean tools in realistic production and operations situations using the Online Lean Manufacturing course
Supplementary learning aids such as OEE calculation worksheets, SMED reduction guides, Takt Time reference cards, and Kanban design templates

Instructor-Led, Practical Learning Experience

Live interactive sessions delivered by experienced Lean practitioners with hands-on domain expertise across automotive, electronics, FMCG, and industrial manufacturing sectors
Real-world examples, case discussions, and applied process improvement exercises to deepen practical understanding of Lean tools and techniques
Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on waste identification, flow analysis, and Kaizen facilitation
Training approach focused on helping learners in Zimbabwe to use Lean tools confidently at work, not just complete the course content

Flexible Learning Support

Choose from weekend Lean Manufacturing training, live virtual sessions, onsite delivery, or customised group learning based on your schedule and organisational requirements
Options include live virtual classroom training, onsite training, and customised group training depending on availability and organisational requirements
Learning support designed to help participants stay on track before, during, and after the Lean Manufacturing training
Additional revision and post-training support may be available based on the selected course format

Learn the Core Concepts Covered in the Course

Understand the Toyota Production System, Lean philosophy, and the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection
Learn waste identification, Value Stream Mapping, 5S implementation, and Kanban design based on the course curriculum
Explore practical use cases showing how Lean Manufacturing tools are applied in automotive, electronics, healthcare, and service operations environments
Build role-relevant knowledge of OEE improvement, TPM implementation, error-proofing, and continuous improvement that supports better operational decisions

Practice, Assessment, and Completion Support

Practice waste walk exercises, value stream mapping, 5S audits, Kaizen event planning, and OEE calculation through structured activities and simulations
Use assessments to identify knowledge gaps in Lean tools and strengthen understanding of weaker areas
Receive guidance from instructors in Zimbabwe to improve understanding of Lean principles and stay aligned with course objectives
Earn a course completion certificate after successfully meeting the training requirements

Career and Workplace Application

Build practical Lean Manufacturing skills that can support career growth, role advancement, or improved production and operations performance
Strengthen confidence in applying Value Stream Mapping, 5S, Kaizen, Kanban, and OEE tools to real-world manufacturing and process improvement challenges
Improve professional credibility through structured, skill-focused Lean Manufacturing training recognised across industrial, automotive, FMCG, and service sectors
Strengthen enterprise-wide operational excellence through Lean Manufacturing corporate training for employees across production, quality, engineering, and operations functions

Lean Manufacturing Training EligibilityWho Can Enroll?

No formal prerequisites are required to enroll in the Lean Manufacturing training program in Zimbabwe
Basic familiarity with production, operations, or quality management concepts is helpful but not mandatory
Professionals with limited prior experience in Lean or continuous improvement tools are welcome to join
Learners from all industries including manufacturing, automotive, FMCG, healthcare, logistics, and service operations can benefit from this training
Individuals and corporate teams in Zimbabwe seeking to build practical Lean Manufacturing skills are eligible to enroll

What You Gain from Lean Manufacturing TrainingSkills You Can Apply on Monday Morning

For Individuals

Lean manufacturing training gives you a complete, practical toolkit for eliminating waste and improving flow on the production line. You learn the five Lean principles, the eight wastes, value stream mapping, 5S, pull systems, TPM and standard work through hands-on exercises you can repeat at work. Whether you run a food and beverage line in Harare, a cement plant in Bulawayo or a packaging operation in the Midlands, the course helps you connect everyday improvements to lower cost, shorter lead times and higher quality.

If you want to prove your value on the shop floor and move into operations, quality or continuous improvement leadership, Lean is one of the most portable skill sets in manufacturing. You gain tools that work in any plant, in any sector, anywhere in Zimbabwe and beyond.

Spot and remove the eight wastes (DOWNTIME) in your own production area
Run 5S and visual management to create a safer, more organised workplace
Map a value stream to expose bottlenecks, delays and excess inventory
Design kanban pull systems that cut overproduction and work-in-progress
Calculate OEE and target the six big losses on your critical equipment
Reduce changeover time with SMED so smaller batches become viable
Lead Kaizen improvements that build a continuous improvement culture
Apply Toyota Production System thinking to real shop-floor problems

For Organizations

Lean manufacturing group training helps Zimbabwean manufacturers build waste-elimination capability across whole teams. Delivered onsite or live virtual, the programme lets operators, supervisors, engineers and managers apply Lean tools directly to your own lines and value streams. For plants facing high input costs, import competition and idle capacity, a Lean-capable workforce is one of the most cost-effective routes to stronger margins and on-time delivery.

When a whole team learns to see and remove waste, improvement stops depending on one champion. Corporate Lean training gives your organisation a common problem-solving language and a repeatable method for raising productivity plant-wide.

Build a shared Lean vocabulary across operators, supervisors and engineers
Lift capacity utilisation without new capital by removing process waste
Cut lead times, inventory and defect rates across production lines
Standardise 5S, visual management and standard work across sites
Improve OEE and equipment reliability through TPM practices
Train cross-functional teams together on your own live processes
Embed a Kaizen culture that sustains improvement after the training

Where Lean Skills Take Your CareerRoles and Demand Across Zimbabwe

Lean manufacturing skills are valued across Zimbabwe's factories, from food and beverage giants to cement, packaging and agro-processing plants, wherever managers need to cut cost and waste. As output recovers and capacity utilisation climbs, employers increasingly look for people who can run 5S, map value streams and lead Kaizen, the practical skills that hands-on Lean manufacturing training builds. Demand spans production supervisors, manufacturing and quality engineers, continuous improvement coordinators and operations managers, and here is what the market shows right now.

13%

Manufacturing output growth, 2025

CZI manufacturing survey

55.9%

Industrial capacity utilisation

CZI 2025 survey

US$35,000

Operations Manager pay, Zimbabwe

per year, Plane 2026

63%

Manufacturers expecting growth in 2026

CZI survey

SECTORS HIRING

—Food and Beverage Manufacturing
—Cement and Building Materials
—FMCG and Consumer Goods
—Packaging and Printing
—Agro-Processing and Edible Oils
—Pharmaceuticals and Mineral Processing

GROWTH TRENDS

—Manufacturing output grew about 13% in 2025
—Capacity utilisation rose to 55.9%, with roughly half still idle
—63% of manufacturers expect better performance in 2026
—Import competition and high costs drive waste-reduction demand
—Technology adopters grew turnover 18.4% versus 8.4%
—Local content and import-substitution push efficiency focus

Sources: CZI Manufacturing Sector Survey 2025-2026; Plane, Glassdoor, worldsalaries (Zimbabwe) 2026; The Zimbabwe Mail, newZWire.

Designation

Lean Manufacturing Professionals in Zimbabwe: Salary Insights and Trends

Companies Hiring in Zimbabwe

US$7K

Min

US$12K

Average

US$22K

Max

worldsalaries - Africarrieres (Zimbabwe) 2026

Delta CorporationNational FoodsDairibordCairns Foods

Source: Delta Corporation - National Foods - Dairibord - Cairns Foods

Industry Challenges Driving Demand for Lean Skills

Idle Capacity and Hidden Waste

Nearly half of Zimbabwe's industrial capacity sits idle, with utilisation near 56%. Lean's waste walk and value stream mapping target the exact losses that keep lines below potential.

Lean waste walks target idle time

High Production Costs

With most costs in US dollars and inputs expensive, thin margins punish every wasted minute and unit. Lean gives managers the tools to remove non-value-adding cost from each process.

Lean strips non-value-adding cost

Pressure from Imports

Cheaper imports pressure local manufacturers on price and quality. Lean flow, 5S and standard work help plants compete on cost, consistency and shorter lead times.

Lean flow lifts cost and quality

Equipment Reliability Gaps

Ageing machinery and unplanned downtime erode output. Total Productive Maintenance and OEE give teams a structured way to lift availability, performance and quality.

TPM and OEE lift availability

Skills and Technology Gap

Only a third of manufacturers upgraded technology in 2025, yet adopters grew far faster. Lean builds the disciplined, improvement-minded workforce that makes any upgrade pay off.

Lean builds an improvement mindset

Weak Exports and Competitiveness

Under 5% of manufacturing output is exported. Building leaner, more reliable production is a first step towards the quality and cost base that export markets demand.

Lean raises the quality base

Sources: CZI Manufacturing Sector Survey 2025-2026; The Zimbabwe Mail; newZWire; Business Times (Zimbabwe).

Lean manufacturing is a practical skill your plant can use immediately. Join Zimbabwe's production leaders learning to cut waste, improve flow and raise productivity. Start today.

Your Zimbabwe Lean Transformation

From Reactive Firefighting to Lean Production Leadership

Your Shop-Floor Transformation

Zimbabwe's manufacturers are under pressure to cut cost, lift capacity and compete with imports, and employers increasingly separate teams who can remove waste from those who cannot. Here is which side of that line you want to be on.

Today

Pay limited by a general operations role with no specialist edge

After Lean

Lean and continuous improvement skills open higher-paid operations roles

Today

Passed over for improvement and production lead roles

After Lean

Ready for continuous improvement, operations and plant leadership roles

Today

You react to breakdowns and firefight problems daily

After Lean

You prevent waste with 5S, TPM, standard work and Kaizen

You Apply Lean at Work

Before

Improvement depends on gut feel and daily firefighting

Now you have

A structured Lean toolkit for eliminating waste at source

Before

No shared language for solving shop-floor problems

Now you have

A common Lean vocabulary shared from operator to manager

Before

Waste and delays stay hidden inside the process

Now you have

Value stream maps that expose bottlenecks and excess inventory

Before

Skills tied to one plant, process or employer

Now you have

Portable Lean skills that transfer across any plant or sector

"In a high-cost, import-pressured market, the plants that win are the ones that see and remove waste every day."

Join thousands of professionals who upskilled with Invensis Learning.

Sources: worldsalaries, Plane, TalentUp (Zimbabwe) 2026; CZI Manufacturing Sector Survey 2025-2026.

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Identifying the eight types of waste: Defects, Overproduction, Waiting, Non-Utilised Talent, Transportation, Inventory, Motion, and Extra Processing
Conducting waste walk exercises to assess current-state operations and prioritise improvement opportunities across production processes
Understanding the difference between MUDA (waste), MURA (unevenness), and MURI (overburden), and applying structured elimination strategies for each

Module 3: Value Stream Mapping (VSM)

Creating current-state value stream maps to visualise the flow of materials and information across the production process
Analysing current-state maps to identify bottlenecks, excess inventory, non-value-added steps, and process cycle efficiency metrics
Designing future-state value stream maps and building improvement roadmaps to close the gap between current and desired production performance

Module 4: 5S Workplace Organisation

Implementing the five steps of 5S: Sort (Seiri), Set in Order (Seiton), Shine (Seiso), Standardise (Seiketsu), and Sustain (Shitsuke)
Conducting 5S workplace assessments, scoring production areas, and identifying corrective actions to improve organisation and visual management
Building 5S sustaining mechanisms including audit schedules, visual controls, and standard work documentation to maintain workplace improvements

Module 5: Just-in-Time (JIT) Production and Kanban

Understanding Just-in-Time production principles including Takt Time analysis, one-piece flow, and pull-based scheduling to reduce inventory and lead times
Designing and implementing Kanban pull systems to manage material flow, signal replenishment, and eliminate overproduction between production stages
Calculating Takt Time, cycle time, and process lead time to balance workload and design efficient production flows aligned with customer demand

Module 6: Kaizen and Continuous Improvement Events

Understanding Kaizen philosophy, the PDCA (Plan-Do-Check-Act) improvement cycle, and the principles of rapid improvement event facilitation
Planning, facilitating, and following up on structured Kaizen events including team selection, problem scoping, root cause analysis, and countermeasure implementation
Building a Kaizen culture through daily improvement habits, idea management systems, and leadership behaviours that sustain continuous improvement momentum

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Understanding error-proofing principles and the difference between detection and prevention approaches to quality control in manufacturing processes
Designing and implementing Poka-Yoke (mistake-proofing) devices and mechanisms to eliminate defects at the source before they reach the next production stage
Applying Jidoka (autonomation) principles to enable machines and operators to detect abnormalities, stop production, and signal for corrective action automatically

Module 8: Total Productive Maintenance (TPM) and OEE

Understanding Total Productive Maintenance principles including the eight pillars of TPM and how TPM supports Lean production by eliminating equipment-related waste
Calculating Overall Equipment Effectiveness (OEE) using Availability, Performance, and Quality components to measure and improve production asset performance
Implementing Autonomous Maintenance practices to involve operators in basic equipment care, inspection, and early defect detection to reduce unplanned downtime

Module 9: Sustaining Lean and Building a Lean Culture

Developing Lean management systems including visual management, daily team meetings, tiered accountability processes, and leader standard work to sustain improvements
Measuring and tracking Lean progress using key performance indicators including lead time, first-pass yield, OEE, inventory turns, and on-time delivery
Building a long-term Lean transformation roadmap, engaging cross-functional teams, and developing internal Lean practitioner capability to drive ongoing operational excellence

Course Curriculumof the Lean Manufacturing Training

The Lean Manufacturing training curriculum in Zimbabwe is structured across nine modules, taking learners from foundational Lean thinking and waste identification through to advanced production system design, error-proofing, and sustaining continuous improvement culture.

100% Secure and Safe download

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Reframes efficiency as a mindset built into every decision, not a one-time cost-cutting exercise.

100% Secure and Safe download

The Lean Tools You Will MasterPractical Skills for the Shop Floor

This Lean manufacturing programme turns theory into shop-floor capability. By the end you can identify waste, map value streams, launch 5S, design pull systems, calculate OEE and lead Kaizen improvements in your own plant.

Identify and Eliminate the Eight Wastes

Learn to spot the eight wastes (DOWNTIME) - defects, overproduction, waiting, non-utilised talent, transportation, inventory, motion and extra processing - on a real production floor, then run a structured waste walk to quantify and prioritise what to remove first.

Map the Value Stream

Build current-state and future-state value stream maps that show every step, delay and inventory point from raw material to finished goods, then use takt time and bottleneck analysis to design a leaner, faster flow.

Apply 5S and Visual Management

Set up Sort, Set in Order, Shine, Standardise and Sustain to create an organised, safe workplace, and use andon, production boards and floor markings so any abnormality is visible at a glance.

Design Pull Systems with Kanban

Understand push versus pull, size supermarkets and calculate the number of kanban cards needed so each process makes only what the next one consumes, cutting overproduction and work-in-progress.

Improve Equipment with TPM and OEE

Apply Total Productive Maintenance and calculate Overall Equipment Effectiveness (Availability x Performance x Quality) to target the six big losses and lift reliability on your critical machines.

Standard Work, SMED and Kaizen

Document standard work, cut changeover time with SMED, level production with Heijunka, mistake-proof with Poka Yoke, and lead the daily Kaizen improvements that sustain a Lean culture.

Who Should TakeLean Manufacturing Training in Zimbabwe?

Manufacturing Managers and Plant Managers

Production Supervisors and Team Leaders

Quality Engineers and Quality Managers

Industrial Engineers and Process Engineers

Supply Chain and Operations Professionals

Maintenance Engineers and TPM Coordinators

Professionals transitioning into Lean or process improvement roles

Continuous Improvement (CI) and Operational Excellence Specialists

Who Can Take This Certification Training

Lean Manufacturing Training Modesfor Professionals and Teams

We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured, corporate, instructor-led experience, choose the option that best supports your skill development journey with the best Lean Manufacturing online training options.

Lean Manufacturing Live Virtual Training

Live online instructor-led sessions
Interactive discussions and virtual activities
Expert guidance from experienced trainers
Practice assessments and revision support
Dedicated Q&A sessions for concept clarification
Fixed schedules for accountability and momentum
Small batch sizes for personalized attention
Access from any location with internet connectivity

USD 345

Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through virtual Lean Manufacturing training.

Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

Lean Manufacturing Classroom Training

Instructor-led classroom sessions
Interactive discussions and group activities
Real-world examples and practical exercises
Structured learning with fixed schedules
Opportunities for peer networking and collaboration
Practice assessments and knowledge checks
Dedicated Q&A and concept clarification
Immediate trainer feedback and support

Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Lean Manufacturing training in Zimbabwe combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

Lean Manufacturing Corporate Group Training

Customized training aligned to organizational goals
Flexible delivery: onsite, virtual, hybrid, or blended
Scheduling tailored to business availability
Role-based examples and industry-relevant discussions
Progress tracking and learner assessments where applicable
Dedicated coordination and administrative support
Consistent learning experiences across teams
Scalable delivery for local, regional, or global workforces

Designed for organizations in Zimbabwe that want to build capabilities at scale, standardize Lean practices, and support workforce development through customized Lean Manufacturing training for companies.

Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

Lean Manufacturing Focused 1-to-1 Training

One-to-one instructor attention
Customized learning plans and objectives
Flexible scheduling based on availability
Personalized feedback and coaching
Additional focus on challenging topics
Targeted practice and revision support
Faster clarification of questions and concepts
Learning pace is adapted to individual needs

Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions from trusted Lean Manufacturing training company.

Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

Lean Manufacturing Live Virtual Training

Live online instructor-led sessions

Interactive discussions and virtual activities

Expert guidance from experienced trainers

Practice assessments and revision support

Dedicated Q&A sessions for concept clarification

Fixed schedules for accountability and momentum

Small batch sizes for personalized attention

Access from any location with internet connectivity

Starts from

USD 345

Please Note: Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through virtual Lean Manufacturing training.

Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

Loading schedules…

Why Choose Invensis Learning in ZimbabweYour Lean Training Partner

Invensis Learning delivers practical, instructor-led Lean manufacturing training for professionals and organisations across Zimbabwe and worldwide. Our programmes combine experienced trainers, hands-on tool exercises and flexible delivery, so learners leave able to apply Lean on their own production lines. As an ISO 9001:2015 and ISO 27001:2022 certified provider, we hold ourselves to international quality and security standards. Whether you enrol as an individual or train a whole team, you get a professional learning experience focused on real workplace results. As an established Lean manufacturing training company in Zimbabwe, we make it straightforward to build lasting Lean capability.

Experienced trainers with real manufacturing and continuous improvement expertise
ISO 9001:2015 certified training provider with global delivery experience
Flexible formats: live virtual, classroom and onsite corporate training
Hands-on exercises using Lean tools on realistic production scenarios
Practical, application-focused learning rather than theory alone
Dedicated learner support before, during and after training
Course completion certificate from Invensis Learning
Scalable delivery for individuals and cross-functional plant teams

200K+

Professionals Trained

12M+

Hours of Training Delivered

Flexible Learning Modes

98%

First-Attempt Pass Rate

ISO 9001:2015 Certified

ISO 27001:2022 Certified

Secure SSL Encryption

Leaders in Training industry for 12+ years

Over 5000 five star reviews

Level AA conformance, W3C WCAG 2.2

Lean Manufacturing Training Locations in ZimbabweAll our classroom training is now available online at your convenience

Lean Manufacturing in Zimbabwe

Hyatt Regency Harare The Meikles, Patrice Lumumba Street, Braeside, Harare, Harare Province, Zimbabwe

Lean Manufacturing in Zimbabwe

The Rainbow Towers, Robert Mugabe Road, Milton Park, Harare, Harare Province, Zimbabwe

Corporate Lean TrainingUpskill Your Plant in Zimbabwe

Suitable for small, medium and large production teams
Delivered onsite, live virtual or hybrid to fit shift patterns
Lean tools applied to your own lines, value streams and data
Experienced trainers with manufacturing and Lean expertise
Role-based examples for operators, supervisors and engineers
Dedicated coordination and support for group training
Scalable delivery across sites in Zimbabwe and the region

What Our Learners Say

Saw Waste I Had Walked Past for Years

"The waste walk and 5S sessions changed how I look at my line. Within a week we cleared clutter, marked tool locations and cut the time operators spent searching. The trainer used real shop-floor examples that mapped straight onto our plant."

Tafadzwa Moyo

Production Supervisor

0/0

Practical Tools I Use Every Day

"Value stream mapping and the OEE exercise were the highlights for me. I now calculate OEE on our packing line and can point maintenance at the six big losses with real numbers instead of guesswork. Very practical and well paced."

Rutendo Chikwava

Manufacturing Engineer

0/0

Strong Grounding in Lean Fundamentals

"A clear, hands-on introduction to Lean. The kanban and standard work sections helped me connect quality problems to process design. I would have liked an extra hour on SMED, but overall it gave me tools I could apply immediately."

Simbarashe Ncube

Quality Engineer

0/0

A Shared Lean Language Across Our Teams

"We ran this onsite for two shift teams at our beverage plant. Having operators, supervisors and engineers learn the same Lean language transformed our daily meetings. The trainer tailored the exercises to our own value streams, which made adoption easy."

Chiedza Mutasa

Operations Director, Food and Beverage Manufacturer

0/0

Measurable Improvement After Training

"As an L&D lead I needed training that delivered measurable results, not just certificates. After the sessions our teams launched 5S and TPM routines that lifted equipment availability. Invensis Learning coordinated everything and kept the group engaged throughout."

Farai Dube

Learning and Development Lead, Cement Manufacturer

0/0

4.6

Ratings

100K+

Happy Learners

100+

Locations Worldwide

99%

Training Satisfaction

Enquire with us now

Drop us a query and our learning consultant will reach out to you shortly

Get Course Details & Pricing

Fill out this form and we will respond quickly.

Explore Our Other Course Categories

Agile Certification Training Courses

Project Management Certification Training Courses

IT Service Management Certification Training Courses

DevOps

IT Governance Certification Training Courses

Other Related Courses

Foundation

Kaizen

Frequently Asked QuestionsHere's everything you may ask...

Lean manufacturing training is a practical, one-day skills course that teaches teams how to identify and eliminate waste from production so that every step adds value for the customer. It is based on the Toyota Production System and covers the five Lean principles, the eight wastes, 5S, value stream mapping, kanban, TPM and Kaizen.

General

What is Lean manufacturing training?

Who should attend this Lean manufacturing course?

The course suits production and manufacturing managers, industrial and quality engineers, operations supervisors, team leaders, maintenance managers and continuous improvement coordinators. It is ideal for anyone in Zimbabwe working in or responsible for a manufacturing or production operation who wants to apply Lean tools.

Do I need prior Lean or manufacturing experience?

No prior Lean experience is required. The training builds every tool from first principles, so beginners and experienced professionals both benefit. Some manufacturing or production exposure is helpful but not essential, and the hands-on exercises make the concepts easy to apply at work.

Is Lean manufacturing relevant to Zimbabwe's industry?

Yes. With capacity utilisation near 56% and high input costs, Zimbabwean manufacturers face real pressure to cut waste and lift productivity. Lean gives food and beverage, cement, packaging, FMCG and agro-processing plants a proven method to reduce cost, improve flow and compete with imports.

How long is the Lean manufacturing training?

The course is delivered in one day (8 hours), covering Lean foundations and the Toyota Production System, the eight wastes, value stream mapping, 5S, pull systems, JIT, TPM and OEE, standard work, SMED, Heijunka, Poka Yoke and Lean culture, with hands-on exercises throughout. A half-day format across two days is also available.

Pricing

How much does Lean manufacturing training cost in Zimbabwe?

Pricing varies by delivery mode, group size and format, so course fees are available on request. Instructor-led, self-paced and corporate group options are offered. Request a quote or speak with a learning advisor for current pricing tailored to your needs.

What is included in the course fee?

The fee typically includes instructor-led training across all Lean modules, hands-on tool exercises, learning materials and templates, and a course completion certificate from Invensis Learning. Ask a learning advisor for the full inclusions on your chosen format.

Do you offer group or corporate pricing?

Yes. We offer corporate group training with customised schedules and volume-based pricing for production teams, PMOs and whole departments. Corporate delivery is especially effective because teams apply Lean tools to your own lines. Contact us for a tailored group quote.

What payment options are available?

We accept major cards and bank transfers, and can arrange invoicing for corporate enrolments. Payment and instalment options depend on the plan you choose, so speak with a learning advisor to select the option that suits you.

Is there a discount for team enrolment?

Yes. Volume-based pricing is available when you enrol several people from the same organisation, and onsite corporate delivery is often the most cost-effective option for larger groups. Ask about corporate or group pricing when you request a quote.

Assessment

Is there an exam for this course?

No. This is a non-certification skills course with no examination. Learning is reinforced through hands-on Lean tool exercises, waste identification activities, manufacturing case examples and team discussion during the one-day programme.

Do I receive a certificate after the training?

Yes. On completing the programme you receive a course completion certificate from Invensis Learning. It records your participation in the Lean manufacturing training and the practical tools you have learned to apply.

How is learning assessed during the course?

There is no formal assessment. Instead, you apply Lean tools through guided exercises such as a waste walk, value stream data collection, a 5S assessment, an OEE calculation and a kanban sizing activity, so you practise each tool on realistic scenarios during the session.

Will I be able to apply Lean tools at work afterwards?

Yes. The training is designed for immediate application. After the course you can run a waste walk, map a value stream, launch 5S, design a kanban pull system, calculate OEE and lead Kaizen improvements in your own plant, with no further renewal required.

Is this a certification course?

No. Lean manufacturing training is a practical skills programme, not a certification, and there is no governing body or exam. You receive a course completion certificate from Invensis Learning that recognises the knowledge and tools you have gained.

Course Content

What topics does the Lean manufacturing course cover?

The course covers Lean foundations and the Toyota Production System, the five Lean principles, the eight wastes (DOWNTIME), value stream mapping, 5S and visual management, pull systems and kanban, Just-in-Time, TPM and OEE, standard work, SMED, Heijunka, Poka Yoke and building a Lean culture.

Which Lean tools will I learn to use?

You learn to apply the waste walk, value stream mapping, 5S, kanban and supermarkets, OEE calculation, Total Productive Maintenance, standard work, SMED quick changeover, Heijunka levelling, Poka Yoke and the A3 problem-solving format, all through hands-on exercises.

Are there hands-on exercises?

Yes. Hands-on exercises run throughout the day, including a Gemba-based waste walk, value stream data collection, a 5S workplace assessment, an OEE calculation and a kanban quantity calculation, so you practise each tool rather than just hearing about it.

What is the Toyota Production System and is it covered?

The Toyota Production System is the origin of Lean, developed by Taiichi Ohno and Shigeo Shingo at Toyota. Its two pillars are Just-in-Time and Jidoka. The course covers TPS foundations and shows how its principles became the global basis for Lean manufacturing.

What are the eight wastes covered in the course?

The eight wastes are remembered as DOWNTIME: Defects, Overproduction, Waiting, Non-utilised talent, Transportation, Inventory, Motion and Extra processing. You learn to recognise, quantify and eliminate each one on a real production floor.

Enrollment

How do I enrol in the Lean manufacturing course?

You can enrol through the Invensis Learning website or by contacting a learning advisor. Choose your preferred format, complete enrolment, and you receive access to schedules, materials and joining details. Request a quote to see upcoming batches.

What training formats are available?

The course is available as live virtual instructor-led training, classroom training and onsite corporate delivery, plus self-paced options where offered. The Lean manufacturing course online is delivered live by an instructor, so remote teams get the same hands-on experience. Choose the format that fits your schedule and, for teams, your shift patterns.

Can the course be delivered onsite in Zimbabwe?

Yes. Onsite corporate delivery is available for manufacturers in Zimbabwe, letting your team apply Lean tools directly to your own lines and value streams. Live virtual and hybrid options are also offered for distributed teams. Contact us to arrange onsite training.

Can I reschedule my training?

Yes. Flexible scheduling options let you reschedule or transfer to another batch on selected plans. Contact learner support to arrange a change that works for you.

How soon can I start?

New sessions run regularly across live virtual and classroom formats, and corporate onsite dates can be arranged around your team's availability. Request a quote or talk to a learning advisor to see the next available schedules.

Lean Manufacturing Training in Zimbabwe

What Is Lean Manufacturing and Why It Matters in ZimbabweA Practical Route to Waste-Free Production

What Is Lean Manufacturing and Why It Matters in ZimbabweA Practical Route to Waste-Free Production

Key Highlightof the Lean Manufacturing Training Course

Lean Manufacturing Training EligibilityWho Can Enroll?

What You Gain from Lean Manufacturing TrainingSkills You Can Apply on Monday Morning

Where Lean Skills Take Your CareerRoles and Demand Across Zimbabwe

SECTORS HIRING

GROWTH TRENDS

Industry Challenges Driving Demand for Lean Skills

Idle Capacity and Hidden Waste

High Production Costs

Pressure from Imports

Equipment Reliability Gaps

Skills and Technology Gap

Weak Exports and Competitiveness

From Reactive Firefighting to Lean Production Leadership

Your Shop-Floor Transformation

Module 1: Foundations of Lean Thinking

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Module 3: Value Stream Mapping (VSM)

Module 4: 5S Workplace Organisation

Module 5: Just-in-Time (JIT) Production and Kanban

Module 6: Kaizen and Continuous Improvement Events

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Module 8: Total Productive Maintenance (TPM) and OEE

Module 9: Sustaining Lean and Building a Lean Culture

Course Curriculumof the Lean Manufacturing Training

Module 1: Foundations of Lean Thinking

The Lean Tools You Will MasterPractical Skills for the Shop Floor

Identify and Eliminate the Eight Wastes

Map the Value Stream

Apply 5S and Visual Management

Design Pull Systems with Kanban

Improve Equipment with TPM and OEE

Standard Work, SMED and Kaizen

Who Should TakeLean Manufacturing Training in Zimbabwe?

Lean Manufacturing Training Modesfor Professionals and Teams

Lean Manufacturing Live Virtual Training

Lean Manufacturing Classroom Training

Lean Manufacturing Corporate Group Training

Lean Manufacturing Focused 1-to-1 Training

Lean Manufacturing Live Virtual Training

Why Choose Invensis Learning in ZimbabweYour Lean Training Partner

Lean Manufacturing Training Locations in ZimbabweAll our classroom training is now available online at your convenience

Corporate Lean TrainingUpskill Your Plant in Zimbabwe

What Our Learners Say

Enquire with us now

Get Course Details & Pricing

Explore Our Other Course Categories

Other Related Courses

Poka Yoke

Lean Six Sigma Yellow Belt

Business Process Management

Six Sigma Awareness

7 QC Tools Training

Lean Six Sigma Black Belt

Quality Function Deployment

Lean IT

Lean Six Sigma Green Belt

Minitab Essentials

Design for Six Sigma

Lean Fundamentals

Quality by Design